Wood Deck Ramp Calculator
Measure from the deck surface down to the ground. Pick a slope and the calculator works out the ramp length, where landings go and how much lumber you need.
Ramp profile
Ramp summary
What is Wood Deck Ramp Calculator?
Wood Deck Ramp Calculator is a free online tool that works out the length, landings, slope and lumber for a wood ramp from a deck to the ground.
Contractors and homeowners use the wood deck ramp calculator to plan wheelchair and mobility ramps under the Americans with Disabilities Act (ADA) guidelines. The tool finds the ramp run, splits long ramps with landings, sizes the handrails and counts the deck boards and stringers.
- Deck builders
- Contractors
- Carpenters
- DIY homeowners
How Wood Deck Ramp Calculator Works?
Wood Deck Ramp Calculator works in 4 steps: it finds the ramp run, splits it with landings, adds handrails and counts the lumber.
- 1Find the ramp run
- 2Split it with landings
- 3Add handrails
- 4Count the lumber
- Find the ramp run. Rise × slope gives the run. A 24" (610 mm) rise at the ADA slope of 1:12 needs 24 ft (7.32 m) of ramp.
- Split it with landings. No run may rise more than 30" (762 mm), so longer ramps get 60" (1.52 m) level landings between runs. Top and bottom landings bring the footprint to 34 ft (10.4 m).
- Add handrails. Ramps rising more than 6" (152 mm) get handrails on both sides, 12" past each end. The default ramp takes 52 ft (15.8 m) of handrail.
- Count the lumber. Deck boards run across the 48" (1.22 m) ramp, 4 pieces per 16 ft board, so the ramp takes 18 boards and 4 stringers.
What Wood Deck Ramp Calculator Uses?
Wood Deck Ramp Calculator uses 4 inputs, 3 formulas and the ADA ramp limits to return 6 results.
1Inputs 4
- Total rise from deck to ground, in inches
- Slope: 1:8, 1:12, 1:16 or 1:20
- Clear width, in inches
- Landing length: 60" or 72"
2Formulas 3
Run = rise × slopeRuns = rise ÷ 30", rounded upHandrails = 2 × (ramp length + 24")
3Results 6
- Ramp length
- Slope angle
- Footprint with landings
- Handrails
- Deck boards
- Stringers
| Item | ADA limit |
|---|---|
| Running slope | 1:12 (4.8°) max |
| Rise per run | 30" (762 mm) max |
| Clear width | 36" (914 mm) min |
| Landing length | 60" (1.52 m) min |
| Handrails | Both sides when the rise is over 6" (152 mm) |
Wood Deck Ramp Calculator FAQ
How long does a ramp need to be for a 24 inch rise?
A ramp for a 24" (610 mm) rise needs to be 24 ft (7.32 m) long at the ADA slope of 1:12. With 60" landings at the top and bottom, the ramp takes 34 ft (10.4 m) of ground. A 1:16 slope stretches the ramp to 32 ft.
What is the maximum slope for a wheelchair ramp?
The maximum slope for a wheelchair ramp is 1:12 (4.8°) under the ADA. A 1:12 slope rises 1" for every 12" of run. A 1:16 or 1:20 slope is easier for people pushing themselves.
When does a deck ramp need a landing?
A deck ramp needs a landing at the top, at the bottom and after every 30" (762 mm) of rise. Each landing is at least 60" (1.52 m) long and as wide as the ramp. A 36" rise at 1:12 splits into 2 runs with a landing between them.
Does a deck ramp need handrails?
Yes, a deck ramp needs handrails on both sides when the rise is more than 6" (152 mm). Handrails sit 34"–38" (864–965 mm) above the ramp surface and extend 12" (305 mm) past the top and bottom.
More deck calculators
Boards and decking
- Deck Board Spacing CalculatorThe gap to leave so the last board fits.
- Deck Board Cost CalculatorDecking, fasteners and tax, by material.
- Deck Board Layout CalculatorButt joint patterns checked row by row.
- Angled Deck Board CalculatorBoards and cuts for diagonal decking.
- Deck Board Feet CalculatorBoard feet, linear feet and lumber price.
- Deck Board Screw CalculatorScrews per board, per joist and per box.
- Deck Board Replacement CalculatorBoards for a partial or full resurface.
Framing and structure