Wood Deck Footing Calculator
Each footing carries part of the deck. Enter the deck size, beams and soil, and the calculator works out the load on each post, checks your footing size and counts the concrete.
Footing section
Footing summary
What is Wood Deck Footing Calculator?
Wood Deck Footing Calculator is a free online tool that sizes deck footings from the load on each post and counts the concrete.
Deck builders use the wood deck footing calculator to check that each footing spreads its post load over enough soil. The tool shares the deck load between the beams, works out the load on one footing, finds the diameter needed and counts bags of concrete.
- Deck builders
- Contractors
- Carpenters
- DIY homeowners
How Wood Deck Footing Calculator Works?
Wood Deck Footing Calculator works in 4 steps: it shares the load, finds the load on one footing, sizes the footing and counts the concrete.
- 1Share the load
- 2Find the load on one footing
- 3Size the footing
- 4Count the concrete
- Share the load. Each beam carries half the joist span on each side. A 12 ft (3.66 m) deck with one beam puts 6 ft (1.83 m) of span on the beam.
- Find the load on one footing. Span carried × post spacing × design load gives the footing load: 6 ft × 8 ft × 50 psf = 2,400 lb (1,089 kg).
- Size the footing. Load ÷ soil bearing gives the area needed: 2,400 ÷ 1,500 psf = 1.6 ft² (0.149 m²), which is a 17.1" (434 mm) circle. An 18" (457 mm) footing passes.
- Count the concrete. An 18" × 36" footing holds 5.30 ft³ (0.15 m³), which is 9 bags of 80 lb concrete. The 3 footings take 27 bags.
What Wood Deck Footing Calculator Uses?
Wood Deck Footing Calculator uses 7 inputs and 4 formulas to return 5 results.
1Inputs 7
- Deck length and depth, in ft
- Beams, not counting the ledger
- Max post spacing, in ft
- Footing diameter: 8"–24"
- Footing depth, in inches
- Design load: 50, 60 or 70 psf
- Soil bearing: 1,500–3,000 psf
2Formulas 4
Footing load = span carried × post spacing × design loadArea needed = footing load ÷ soil bearingConcrete = 3.14 × radius² × depthBags = concrete ÷ 0.6 ft³ (80 lb) or ÷ 0.45 ft³ (60 lb)
3Results 5
- Footing count
- Load on one footing
- Diameter needed
- Concrete per footing
- Concrete bags in total
| Diameter | Area | Load it carries |
|---|---|---|
| 12" (305 mm) | 0.79 ft² | 1,178 lb (534 kg) |
| 16" (406 mm) | 1.40 ft² | 2,094 lb (950 kg) |
| 18" (457 mm) | 1.77 ft² | 2,651 lb (1,202 kg) |
| 24" (610 mm) | 3.14 ft² | 4,712 lb (2,137 kg) |
Wood Deck Footing Calculator FAQ
How big should footings be for a 12x16 deck?
A 12 × 16 ft deck with one beam and posts 8 ft apart needs 18" (457 mm) footings on 1,500 psf soil. Each interior footing carries about 2,400 lb (1,089 kg). On 2,000 psf soil, a 16" footing carries the same load.
How deep do deck footings need to be?
Deck footings need to reach below the local frost line and at least 12" (305 mm) into undisturbed soil. Frost depth runs from 0" in the far south of the US to 48" (1.22 m) or more in the north. Ask your building department for the frost depth.
How many bags of concrete do I need for a deck footing?
An 18" × 36" deck footing needs 9 bags of 80 lb concrete or 12 bags of 60 lb concrete. The footing holds 5.30 ft³ (0.15 m³). A 12" × 36" footing needs 4 bags of 80 lb concrete.
Can I use precast deck blocks instead of footings?
Yes, precast deck blocks work for low freestanding decks where your building department allows them. Attached decks and decks higher than about 30" (762 mm) need poured footings below the frost line. Deck blocks do not resist frost heave or uplift.
More deck calculators
Boards and decking
- Deck Board Spacing CalculatorThe gap to leave so the last board fits.
- Deck Board Cost CalculatorDecking, fasteners and tax, by material.
- Deck Board Layout CalculatorButt joint patterns checked row by row.
- Angled Deck Board CalculatorBoards and cuts for diagonal decking.
- Deck Board Feet CalculatorBoard feet, linear feet and lumber price.
- Deck Board Screw CalculatorScrews per board, per joist and per box.
- Deck Board Replacement CalculatorBoards for a partial or full resurface.
Framing and structure