Angled Deck Board Calculator
Diagonal boards look great and eat more lumber. Set your deck size and board angle to see how many boards you need, how many angled cuts to make and how close the joists must be.
Diagonal layout
Diagonal board summary
What is Angled Deck Board Calculator?
Angled Deck Board Calculator is a free online tool that counts the deck boards, angled cuts and joist spacing for diagonal decking.
Deck builders use the angled deck board calculator to price a diagonal deck pattern before choosing it. The tool lays each row at your angle, clips the rows to the deck edges, packs the pieces onto stock boards and compares the count with the same deck laid straight.
- Deck builders
- Contractors
- Carpenters
- DIY homeowners
How Angled Deck Board Calculator Works?
Angled Deck Board Calculator works in 5 steps: it draws the rows at your angle, measures each piece, packs the pieces, adds waste and checks the joist spacing.
- 1Draw the rows at your angle
- 2Measure each piece
- 3Pack the pieces
- 4Add the waste
- 5Check the joist spacing
- Draw the rows at your angle. Board centerlines run at your angle from the house wall and are clipped to the deck edges. A 16 × 12 ft (4.88 × 3.66 m) deck at 45° has 42 rows.
- Measure each piece. Each row gives one piece, plus one board width for the two angled end cuts. Pieces longer than a stock board are split. The default deck takes 51 pieces.
- Pack the pieces. Pieces are packed onto 16 ft (4.88 m) stock boards longest first, so short corner pieces come from offcuts. The layout uses 35 boards.
- Add the waste. A 15% waste allowance gives 41 boards to buy, compared with 29 boards for the same deck laid straight.
- Check the joist spacing. Boards at 45° cross 16" joists every 22 5/8" (575 mm), so the calculator recommends joists at 12" (305 mm) on center.
What Angled Deck Board Calculator Uses?
Angled Deck Board Calculator uses 6 inputs and 3 formulas to return 6 results.
1Inputs 6
- Deck length and depth, in ft
- Board angle from the house wall, 15°–75°
- Board face width
- Gap between boards
- Stock board length
- Waste allowance, %
2Formulas 3
Piece length = clipped row length + 1 board widthSpan along the board = joist spacing ÷ cos(angle)Miter saw angle = 90° − board angle
3Results 6
- Boards to buy
- Extra compared with straight
- Longest piece
- Angled cuts
- Recommended joist spacing
- Linear feet
| Board angle | Span along the board | Joist spacing to use |
|---|---|---|
| 0° (straight) | 16" (406 mm) | 16" o.c. |
| 30° | 18 1/2" (469 mm) | 12" o.c. |
| 45° | 22 5/8" (575 mm) | 12" o.c. |
Angled Deck Board Calculator FAQ
How much more decking does a diagonal deck need?
A diagonal deck at 45° needs about 40% more boards than the same deck laid straight, including the higher waste allowance. A 16 × 12 ft deck takes 41 boards at 45° with 15% waste, and 29 boards laid straight with 10% waste. The extra comes from the angled corner pieces.
What angle do I set my miter saw to for diagonal deck boards?
Set the miter saw to 90° minus the board angle. Boards at 45° to the house take a 45° cut, and boards at 30° take a 60° cut. The calculator shows the saw angle under the angled cut count.
What joist spacing does diagonal decking need?
Diagonal decking at 45° needs joists at 12" (305 mm) on center. On 16" joists, a 45° board spans 22 5/8" (575 mm) between joists, which is too far for most 5/4 wood and composite boards. Check the board maker’s span table.
Can I lay diagonal decking on 16-inch joists?
No, most deck boards at 45° need joists closer than 16" (406 mm). Shallow angles near 15° stay close to a 16" span along the board. Add blocking or sister joists to an existing frame before switching to a diagonal pattern.
More deck calculators
Boards and decking
- Deck Board Spacing CalculatorThe gap to leave so the last board fits.
- Deck Board Cost CalculatorDecking, fasteners and tax, by material.
- Deck Board Layout CalculatorButt joint patterns checked row by row.
- Deck Board Feet CalculatorBoard feet, linear feet and lumber price.
- Deck Board Screw CalculatorScrews per board, per joist and per box.
- Deck Board Replacement CalculatorBoards for a partial or full resurface.
Framing and structure